How to register Yealink Wireless handset to Base Unit

To register a handset to the base:

  1. Press and hold the button on the front of the W52P/W60B base unit (about 5 secs); the registration LED will slowly flash, indicating the base station is in the registration mode
  2. Press the OK button on the handset to enter the main menu
  3. Go to Settings > Registration and press OK on Register Handset
  4. Press OK on Base 1; the handset will search for the base registration signal
    Note: If the Handset has trouble searching for the base, Power Cycle the Base and try again.
  5. Press the OK soft key when the LCD screen displays the RFPI code of the base station
  6. Enter the system PIN (default: 0000)
  7. Press the Done soft key.


The handset will play a warning tone and prompts Handset Subscribed, which indicates the handset is registered successfully. After successful registration, an internal handset number and handset name appear on the LCD screen.